Epoxy Coating and Polyurea Spray Coating Systems

RHINO TUFF STUFF

2010-01-20T16:48:00.000-08:00

Rhino TUFF STUFF®
Technical Data Sheet

Part A - Isocyanate Date Issued: Dec 2003
Part B - Resin Revised Date: 14-Oct-2008

PRODUCT TYPE
Elastomeric polyurethane. 100% solids (no (VOCs, no solvents)
(Variations: can be pigmented)

GENERAL PROPERTIES:
Rhino TUFF STUFF is a two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing,elastomeric polyurethane lining system.
销
> Lining thickness varies based on application
typically minimum of 3mm up to unlimited thickness
> Very good slip resistance
> Good noise reduction
> Excellent weather resistance
> Excellent abrasion resistance
> Excellent corrossion resistance
> Excellent impact resistance
> Good chemical resistance

RECOMMENDED USES
# Excellent protective lining for abrasion, impact and corrosion resistance.
销 # Spray-on application creates a monolithic seamless lining, which conforms to
any shape and size.
# Elastomeric properties allow for application to surface subject to: vibration,
expansion, contraction, movement, flexing, abrasion and impact.
# Bonds virtually to all substrates of any dimension, including all metals,
concrete, wood and fibreglass.
销 # Reduces noise from vibration and impact.
销 # Stable from –400C to 79.40 C
销 # Withstands light vehicular and foot traffic.
销 # Casting material for material handling equipment such as Chutes, hoppers,
rollers, etc.
销 # Aggressive slip resistance performance can be achieved with aggregate
integrated into lining.
销 # Waterproof Membrane, AS/NZ 4858:2004.
销 # Potable Water Membrane, AS/NZ 4020:2002.

销
NOT RECOMMENDED FOR:
< Sustained temperatures below –400C or above 79.40C.
< Application to high density polyethylene or thermo plastics.

CHEMICAL RESISTANCE:
Good resistance to many routine chemicals such as: weak acids, weak alkalies, oils and cleaning agents. For specific applications and/or information, consult with Rhino Linings® representatives.

SUBSTRATES:
Metals, wood, concrete, brick, fibreglass and geotextiles.

VOLATILE ORGANIC CONTENT:
None. 100% solids. No solvents

DRY FILM THICKNESS RANGE (subject to application)
Varies based on application, typically used at a minimum of 3mm up to unlimited thickness.
Waterproof Coating Thickness: 2mm to unlimited.
Automotive Coating Thickness: Floor/Tailgate/Rail 4 to 6+ mm, Walls 2+ mm.

SHELF LIFE and CONTAINER SIZE:
Part A – Isocyanate: nine months, unopened. 75kg and 250kg Drums.
Part B – Resin: nine months, unopened. 62kg and 204kg Drums.

BASE MATERIAL COLOURS:
Isocyanate – yellow or light straw colour.
Resin – Opaque

COLOUR OPTIONS:
Eight (8) standard colours available. Custom colours available by special order to AS2700 Australian Standard Colour Chart.

For any requirement please feel free to contact.

Thank you and succes for you all.

Michael S. Thang
Business Development and Technical Advisor.
+622168068293, +628164850242

RHINOCHEM 2170

2010-01-06T09:19:00.000-08:00

RhinoChem 2170
(formerly Hi-Chem)
Technical Data Sheet

Part A - Isocyanate
Part B - Resin

PRODUCT TYPE
Elastomeric polyurethane. 100% solids (no (VOCs, no solvents)
(Variations: can be pigmented)

GENERAL PROPERTIES:
RhinoChem 2170 is a two-component, 100% solids (no VOCs, no solvents), exothermic,
rapid curing, elastomeric polyurethane lining system specifically designed for excellent chemical resistance.
# Dense chemical structure imparts high impermeability
# Excellent corrosion resistance
# Excellent chemical resistance

RECOMMENDED USES
# Durable protective lining with excellent chemical resistance for applications
such as:
o primary and secondary containment.
o Chemical processing equipment, tank lining and wet wells.
o Water and wastewater.
o Immersion service

# Spray-on application creates a monolithic, seamless lining, which conforms to any
shape or size.
# Stable from –40 0C to 79.4 0C.

NOT RECOMMENDED FOR:
# Sustained temperatures below –40 0C or above 79.4 0C. Exhibits short term
stability up to 100 0C.
# Concrete substrates subject to high impact.
# Application to high density polyethylene or thermo plastics.

CHEMICAL RESISTANCE:
> RhinoChem 2170 has excellent resistance to a variety of commercial and industrial
chemicals.
Examples of some of the chemicals it can withstand are listed below.
For further information, please refer to a chemical_info@yahoo.com
> Properties were checked against a RhinoChem 2170 polyurethane lining, 3.18mm thick
stock at 23.8 0C.

Results may vary at elevated temperatures.
Acetic Acid to 10% Hydrochloric Acid to 15% Salts
Ammonia to 5% Hydrogen Peroxide to 10% Salt Solution
Bleach Nitric Acid to 10% Sodium Hydroxide to 50%
Caustic Soda Lye to 50% Oils Sodium Hypochlorite to 13%
Cleansing Chemicals Phosphoric Acid to 50% Sulphuric(Sulfuric) Acid to 50%
Disinfecting Chemicals Potash Lye to 20% Tannic Acid to 50%

SUBSTRATES:
Metals, wood, concrete, brick, fibreglass and geotextiles.

VOLATILE ORGANIC CONTENT:
None. 100% solids. No solvents.

DRY FILM THICKNESS RANGE (subject to application)
O Varies based on application, typically used at a minimum of 2mm to 4mm.
O Waterproof Coating Thickness: 2+ mm.
O Chemical Immersion Coating Thickness: Bund Floors 3 to 6+ mm, Walls 3+ mm.

SHELF LIFE and CONTAINER SIZE:
Part A – Isocyanate: nine months, unopened. 75kg and 250kg Drums.
Part B – Resin: nine months, unopened. 62kg and 204kg Drums.

BASE MATERIAL COLOURS:
Isocyanate – amber/dark brown colour.
Resin – Off-white

COLOUR OPTIONS:
Limited colour range available.

TYPICAL PHYSICAL PROPERTIES OF RhinoChem 2170
Hardness (Shore D) 70±3 ASTM D-2240
Tensile Strength (psi)* 3500 – 3700 ASTM D-412
Elongation (%) 25 – 30 ASTM D-412
Taber Abrasion Resistance (mg of loss/1000 cycles)
CS17 Wheel: 1000 grams weight 53 ASTM D-4060
Tear Resistance (pli)* Die C 180 – 190 ASTM D-624
Impact Resistance(2.54mm thick sample) No cracking deterioration Gardner Tester
* Properties were checked using RhinoChem
2170 polyurethane lining 3.18 mm thick stock.

REACTIVITY:(Tested in cups, 161g combined @ 25 deg C)
Initiation 30-40 secs; Gel time 40-60 secs; Tack Free/Solid \<180 secs; 95-99% cure 24 hours.

SAFETY PRECAUTIONS:
Health Considerations: consult Rhino Linings Material Safety Data Sheets.
The uncured components of Rhino Linings RhinoChem 2170 can cause irritation to
the eyes, skin, mucous membranes and are harmful is swallowed. When handling,avoid contact with eyes and skin (especially open cuts). In case of contact,immediately wash off with plenty of water for at least fifteen (15) minutes. For eyes, obtain medical attention. Always wash hands before eating. Obtain immediate medical
attention in case of ingestion.

RhinoChem 2170 contains isocyanates and may cause allergic skin or respiratory reactions. Do not use if you have chronic breathing problems (asthma) or if you have ever had reactions to isocyanates. When applying RhinoChem 2170, avoid breathing harmful vapours. Fresh air-supplied standard painter’s hood or full face respirator must be worn by all personnel entering the area where RhinoChem 2170 is being applied until all vapours have been exhausted. In case of extreme exposure or adverse reaction, remove affected personnel to fresh air immediately and obtain medical help.

Important: consult the Rhino Linings Material Safety Data Sheets.
Read and follow warning labels on all components.
For professional use only. Follow cautions and handling guidelines in
Rhino Linings Technical Manual. The information herein is believed to be reliable, but unknown risks may be present. All warranties of any kind, expressed or implied, including warranties of fitness for a particular purpose, are specifically
disclaimed.

For your Protection:
The information and recommendations in this publication are, to the best of our knowledge,reliable. Suggestions made concerning the products and their uses, applications, storage and handling are only the opinion of Rhino Linings Australasia Pty Ltd. Users should conduct their own tests to determine the suitability of these products for their own particular purposes and of the storage and handling methods herein suggested. The toxicity and risk characteristics of products made by Rhino Linings Pty Ltd will necessarily differ from the toxicity and risk characteristics developed when such products are used with other materials during a manufacturing process. The resulting risk characteristics should be determined and made known to ultimate end-users and processors. Because of numerous factors affecting results,
Rhino Linings Australasia Pty Ltd makes no warranty of any kind, express or implied,
other then that the material conforms to its applicable current Standard
Specifications. Rhino Linings Australasia Pty Ltd hereby disclaims any and all
other warranties, including but not limited to those of merchant
ability or fitness for a particular purpose. No statements made herein may be construed as a representation or warranty. The liability of Rhino Linings
Australasia Pty Ltd for any claims arising from or sounding in breach of warranty, negligence, strict liability, or otherwise shall be limited to the purchase price of the material.

For any further information please feel free to contact.

Michael S. Thang
+622168068293, +628164850242

RHINO DURASPRAY

2010-01-06T08:32:00.000-08:00

Part A : Isocyanate
Part B : Resin

RODUCT TYPE:
Elastomeric polyurethane. 100% solids (no VOCs, no solvents).
(Variations: can be pigmented with limited colours)

GENERAL PROPERTIES:
Rhino Duraspray is a commercial grade two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing, elastomeric polyurethane lining system.
> Lining thickness varies based on application, typically minimum of 1.5mm up to
unlimited thickness.
> High tensile strength and tear strength properties.
> Very good abrasion resistance. Not recommended where higher impact resistance is
required.
> Good chemical resistance.
> Excellent corrosion resistance.
> Good noise reduction.

RECOMMENDED USES:
> Excellent general purpose industrial lining for applications such as:
o Material delivery systems where a seamless flexible system is essential.
o Floor and wall protection in industries such as food processing, food
storage, veterinary, production area and laboratories.
o Secondary containment-as a monolithic, impermeable lining for industrial
plant, agriculture, and petrochemical applications. Excellent when used with
Geotextile substrates
> Spray-on application creates a monolithic, seamless lining, which conforms to
any shape and size.
> Elastomeric properties allow for application to surfaces subject to: vibration,
expansion, contraction, movement,
> Casting material for material handling equipment such as Chutes, Hoppers,
rollers, etc.
> Bonds to virtually all substrates of any dimension, including metals, woods,
concrete, brick and fiberglass.
> Can withstand vehicle forklift traffic and heavy loads with proper thickness
build.
> Reduces noise from vibration and impact.
> Stable from -40° C to 79.4° C.
> Aggressive slip resistance performance can be achieved with aggregate integrated
into lining.

NOT RECOMMENDED FOR:
> Sustained temperatures below -40° C or above 79.4° C.
> Application to high density polyethylene or thermo plastics.
> Higher impact resistance locations.

CHEMICAL RESISTANCE:
Good resistance to many commercial and industrial chemicals such as acids, alkali’s, oils and cleaning chemicals.
For specific applications and information, please consult with a chemical_info®yahoo.com

SUBSTRATES:
Metals, wood, concrete, brick, fiberglass, and geotextiles.

VOLATILE ORGANIC CONTENT:
None. 100% solids. No solvents.

DRY FILM THICKNESS RANGE:
> Varies based on application, typically used at a minimum of 1.5 mm to unlimited
thickness.
> Factory Floor Coating Thickness: 3mm to unlimited. (eg forklifts and trucks).
> Bunding Coating Thickness: 2mm to unlimited. (eg sub-station bunds, foot traffic
only)

SHELF LIFE:
Part A - Isocyanate: Nine months, unopened. 75kg and 250kg Drums.
Part B - Resin: Nine months, unopened. 62kg and 204kg Drums.
In colder environments the chemical components should be pre-heated. Stir B-side before use.

BASE MATERIAL COLORS:
Isocyanate - amber/dark brown.
Resin – pale/opaque.

COLOR OPTIONS:
Standard color – black or grey.
Custom dark colors only available by special order.

Data Sheet
TYPICAL PHYSICAL PROPERTIES OF Rhino Duraspray
Hardness (Shore A) 95±5 ASTM D-2240
Tensile Strength (psi)* 2100 – 2200 ASTM D-412
Elongation (%)* 60 – 80 ASTM D-412
Flexural Modulus (psi) 2400 – 2800 ASTM D-790
Taber Abrasion Resistance (mg of loss/1000 cycles)
H18 Wheel; 1000 grams weight 20 – 25 ASTM D-4060
Tear Resistance (pli)* Die C 200 – 250 ASTM D-624
Ross Flex (% crack growth per 50,000 cycles) 0 ASTM FIA-308
Specific Gravity (grams/cc) 1.06 – 1.08 ASTM D-792
Water Absorption (%) < 1.5 ASTM D-570
Dielectric Strength (volts/mil) 300 ASTM D-149
Volume Resistancy (ohm/inches) 6 X 10 (12) ASTM D-257
Dielectric Constant (MHz) 5.4 ASTM D-150
Dissipation Factor (MHz) 0.058 A ASTM D-150
*Properties were checked of Rhino Duraspray polyurethane lining 3.18 mm thick stock.

REACTIVITY:(Tested in cups, 161g combined @ 25 deg C)
Initiation 10-20 secs; Gel time 20-30 secs; Tack Free/Solid \<60 secs; 95-99% cure 24 hours.

SAFETY PRECAUTIONS:
Health Considerations: Consult the Rhino Linings® Material Safety Data Sheets.
The uncured components of Rhino Duraspray can cause irritation to the eyes, skin, mucous membranes and are harmful if
swallowed. When handling, avoid contact with eyes and skin (especially open cuts). In case of contact, immediately wash off
with plenty of water for at least fifteen (15) minutes. For eyes, obtain medical attention. Always wash hands before eating.
Obtain immediate medical attention in case of ingestion.

Rhino Duraspray contains isocyanates and may cause allergic skin or respiratory reactions. Do not use if you have chronic
breathing problems (asthma) or if you have ever had reactions to isocyanates. When applying Rhino Duraspray, avoid
breathing harmful vapors. Fresh air-supplied standard painter’s hood or full face respirator must be worn by all personnel
entering the area where Rhino Duraspray is being applied until all vapors have been exhausted. In case of extreme exposure
or adverse reaction, remove affected personnel to fresh air immediately and obtain medical help.
Rhino Duraspray components are combustible liquids Class IIIB. Store and transport according to regulation.

Important: Consult the Rhino Linings Material Safety Data Sheets.
Read and follow warning labels on all components. For professional use only. Follow cautions and handling guidelines in Rhino
Linings Technical Reference Manual.
The information herein is believed to be reliable, but unknown risks may be present. All warranties of any kind, expressed or
implied, including warranties of fitness for a particular purpose, are specifically disclaimed.
For Your Protection:
The information and recommendations in this publication are, to the best of our knowledge, reliable. Suggestions made
concerning the products and their uses, applications, storage and handling are only the opinion of Rhino Lining Australasia Pty
Ltd. Users should conduct their own tests to determine the suitability of these products for their own particular purposes and
of
the storage and handling methods herein suggested. The toxicity and risk characteristics of products made by Rhino Lining
Australasia Pty Ltd. will necessarily differ from the toxicity and risk characteristics developed when such products are used w
ith
other materials during a manufacturing process. The resulting risk characteristics should be determined and made known to
ultimate end-users and processors. Because of numerous factors affecting results,
Rhino Linings Australasia Pty Ltd makes
no warranty of any kind, express
or implied,
other than that the material conforms to its applicable current Standard
Specifications. Rhino Linings Australasia Pty Ltd hereby disclaims any and all other warranties, including but not limited to
those of merchantability or fitness for a particular purpose. No statements made herein may be construed as a representation
or warranty. The liability of Rhino Linings Australasia for any claims arising from or sounding in breach of warranty, negligen
ce,
strict liability, or otherwise shall be limited to the purchase price of the material.

Source :
©2006 Rhino Lining Australasia, Pty Ltd.
Rhino Linings Australasia Pty Ltd
501-505 Olsen Avenue, Molendinar Qld 4214 Australia
Ph: +61 7 5585 7000 ~ Fax: +61 7 5539 6399
Rhino Linings USA, Inc.
∞
Rhino Linings of Canada, Inc.
∞
Rhino Linings Latin America,
∞
Rhino Linings Europe

For any further information please feel free to contact me.
Michael S. Thang
+622168068293, +628164850242

POLYUREA SPRAY COATING

2010-01-06T07:07:00.000-08:00

POLYUREA SPRAY

Providing superior protection against :
> Abasion
> Corrosion
> Impact
> Containment
> Chemical Resistant
> Fast drying
> Etc.

Description

BACKGROUND OF THE INVENTION

The present invention relates generally to the preparation and application of polyurea elastomeric coating/lining systems, and more particularly to a phenolic/polyurea co-polymer system for applications requiring extreme chemical resistance and performance.

Many different types of materials are used to build the engineering structures and vehicles found in our lives today. Most of these materials must be protected from environmental elements of one form or another. For instance, steel needs to be protected from moisture and oxygen to prevent corrosion. Likewise, wood needs to be protected from moisture to prevent rotting. Concrete should be protected from corrosion due to chlorides, other salts, and corrosive air. Further, moisture penetration can lead to spalling of concrete from freeze-thaw cycling.
Read more at http://chemical-news.blogspot.com/2008/11/polyurea-spray.html